电位器铸模周围以树脂环绕，可避免助焊剂流入
改良的操作手感，增强扣入PCB板的强度
可增加抽头或中央卡点
产业应用：音响控制、工业控制、消费性电子。
| Total Resistance | 1KΩ~1MΩ |
| Full Resistance Tolerance | 500Ω<R<1MΩ : ± 20% : R<500Ω or R>1MΩ : ±30% |
| Linearity Of Resistance | A, B, W |
| Withstand Voltage | Hold at AC 250V for 1 minute |
| Insulation Impedance | ＞100MΩ at DC 250V |
| Sliding Noise | ＜100mV |
| Residual Resistance | Terminals.1~2：＜ 30Ω Terminals.2~3：＜ 50Ω |
| Synchronization Error (Double) | ± 2dB at 50% position of sliding stroke |
| Rated Voltage | AC 50V/DC 10V |
| Rated Power | 0.025W |
| Sliding Stroke | 20mm, 30mm |
| Sliding Moment | 10gf~100gf |
| Stop Strength | 3.0Kgf (increased from base to 2mm) |
| Segment Torque (Intermediate Dot Model Only) | 30~150gf |
| Slide Handle Push-Pull Strength | Hold above 3.0Kgf for 10 seconds. |
| Sliding Handle | Within 2 (2XL) /20mm (L: horizontal length of both sides) |
| Slip Life | ＞50，000 cycles |