电位器铸模周围以树脂环绕，可避免助焊剂流入
可配合各种产品需求，大幅度地客制化
供音频产品应用的微型设计
产业应用：工业控制设备、音响控制、消费性电子。
| Rated Power | DC 5V, 2.5mA (≥1mA ) |
| Contact Resistance | 10Ω Max at DC 5V, 1mA |
| Insulation Resistance | ＞ 100MΩ at 250V for 1 minute |
| Withstand Voltage | AC 300V for 1 minute |
| Number of Detent | 20 detents (Angle: 18±° 3°) |
| Resolution | 10 Pulses/360°for each phase. Chattering ≤3ms |
| Phase-Difference | Td=T/4±T/6(in case of no detent) |
| Rotational Torque | 20 ~ 250gf.cm |
| Total Rotational Angle | 360° Continuous |
| Push-Pull Strength of Shaft | Pull: ≥10.0Kgf Push: ≥10.0Kgf |
| Bushing & Nut Tight Strength | ≥10.0Kgf.cm |
| Rotational Life | ≥50,000 Cycles |
| Load Life | ≥50,000 Cycles （with load） |
| Dry Heat | 70C°, 240±10H, CR is ≤10Ω ; IR ≥10MΩ at DC250V. |
| Cold | -30C°, 1H, CR is ≤10Ω ; IR ≥10MΩ at DC250V. |
| Damp Heat | 40±2℃,90-95 RH for 96H,CR is ≤10Ω ; IR ≥10MΩ at DC 250V. |